Columns

Tubing parts

Connector

Hand-tight EXP® fitting

Fitting for Connecting System and Main Column/Guard Cartridge (Adjustable ferrule, Max. pressure: 137 Mpa)
Product Number Specification
XRHTF-01 Hand-tight EXP® fitting (Hand-tight nut and titanium hybrid ferrule included)

*Fitting for connecting system and main column/guard cartridge is also available.

Replacement Ferrule
Product Number Specification
XRHTF-05 Titanium hybrid ferrule (5/pack)

*EXP® is a registered trademark of Optimize Technologies, Inc.

Handy connector 1

Features
  • A ferrule integrated into a connector
    Handy connector 1 resists pressure to about 21 MPa. Handy connector 1 is suitable for tubing systems of relatively low pressure. Connection to a tubing system is easy because a ferrule is integrated into the connector.
  • Metal free
    The whole connector is made from PEEK. Handy connector 1 is suitable for metal-free tubing systems using PEEK tubes.

Product Number Specification
XRP0203 For tubing systems of 1/16" outer diameter, 10/pack

Handy connector 2

Features
  • High pressure resistance and made from stainless steel
    Handy connector 2 resists pressure to about 42 MPa. Handy connector 2 is suitable for connection to the injection side of a column, to which high pressure is applied. It is also useful for connection of a guard column or a precolumn filter.
  • Metal free
    The ferrule at the wetted part of the connector is made from PEEK. Handy connector 2 is suitable for metal-free tubing systems using PEEK tubes.
  • Replaceable ferrule
    Ferrule needs to be replaced only when it deteriorates, and not the entire connector.

Product Number Specification
XRP0204 For tubing systems of 1/16" outer diameter, 2/pack
XRP0205 Spare PEEK ferrule, 10/pack

Column coupler

Product Number Specification
XRCP1602 1/16" outer diameter, 0.25 mm inner diameter
XRCP1605 1/16" outer diameter, 0.5 mm inner diameter
XRCP1620 1/16" outer diameter, 0.8 mm inner diameter

Airtight stopper

Airtight stoppers are used to prevent column contents from drying. Please use a stopper appropriate for each column connection type.

1/16" airtight stopper

Product Number Specification
XPMSY YMC original type (PEEK), 5/pack
XPMSW Waters type (stainless), 5/pack

1/8" airtight stopper

Product Number Specification
XPMS8 Female nut, 2/pack